1.检查开齿盘是否清洁,机器各部件是否运转自如。

1. Check whether the toothed disc is clean and whether all components of the machine operate smoothly.

　　2.检查托辊是否与型材底部形状吻合。

2. Check if the roller matches the shape of the bottom of the profile.

　　3.手送型材进入机器,调整开齿盘至型材齿槽中间,按工艺要求压入适当深度。

3. Hand feed the profile into the machine, adjust the toothed disc to the middle of the profile groove, and press it into the appropriate depth according to the process requirements.

　　4.调整各导向轮,确保型材运动方向与齿盘接触点运动方向一致。

4. Adjust each guide wheel to ensure that the direction of profile movement is consistent with the direction of tooth contact point movement.

　　5.注意电气开关是否指向OFF。

5. Pay attention to whether the electrical switch points to OFF.

　　6.调整后,可先试一段型材,用隔热条检查是否合适。

After adjustment, you can first try a section of the profile and check if it is suitable with an insulation strip.

　　7.按下启动按钮正式开机工作。

7. Press the start button to officially start up and work.

以上就是有关：AB面双头开齿机 的介绍，想了解更多的内容请点击：https://www.jnsaiwo.com 我们将会全心全意为您提供满分服务，欢迎您的来电！

The above is an introduction to the AB face double head gear opening machine. To learn more, please click: https://www.jnsaiwo.com We will wholeheartedly provide you with full score service. Welcome to call us!