穿条操作

Wearing operation

上料：将待穿条的铝合金型材放置在穿条机的进料台上，确保型材的槽口与胶条输送方向一致。对于一些较长的型材，可能需要使用辅助支撑装置来防止型材下垂或晃动。

Loading: Place the aluminum alloy profile to be threaded on the feeding platform of the threading machine, ensuring that the groove of the profile is consistent with the direction of the rubber strip conveyor. For some longer profiles, auxiliary support devices may be needed to prevent the profiles from sagging or shaking.

启动设备：打开穿条机的电源开关，启动设备。设备启动后，胶条会自动从放置架上被牵引进入穿条机的送料机构。

Start the device: Turn on the power switch of the strip threading machine and start the device. After the device is started, the rubber strip will be automatically pulled from the placement rack into the feeding mechanism of the threading machine.

穿条过程：胶条在送料机构的推动下，沿着型材的槽口前进。在穿条过程中，要注意观察胶条是否能够顺利地进入槽口，以及胶条的位置是否正确。如果发现胶条有偏移或卡顿现象，应及时停机调整。

Thread process: The rubber strip is pushed forward along the groove of the profile by the feeding mechanism. During the process of threading, it is important to observe whether the rubber strip can smoothly enter the groove and whether the position of the rubber strip is correct. If the rubber strip is found to be offset or stuck, it should be stopped and adjusted in a timely manner.

切割胶条：当胶条穿到型材的末端时，穿条机的切割装置会按照预设的长度将胶条切断。切割后的胶条应与型材的端部齐平，确保门窗安装后的美观度。

Cutting rubber strip: When the rubber strip reaches the end of the profile, the cutting device of the threading machine will cut the rubber strip according to the preset length. The cut rubber strip should be level with the end of the profile to ensure the aesthetic appearance of the doors and windows after installation.

下料：穿条完成后，将穿好胶条的型材从出料台上取下，放置在指定的位置。然后，重复上述上料、穿条、切割和下料的操作，直到完成所有型材的穿条工作。

Cutting: After threading, remove the profile with the rubber strip from the discharge table and place it in the designated position. Then, repeat the above operations of loading, threading, cutting, and unloading until all profiles are threaded.

设备维护

Equipment maintenance

清洁设备：在穿条机使用完毕后，及时清理设备上的胶条碎屑、型材粉末等杂物。可以使用压缩空气或吸尘器进行清理，确保设备的各个部件干净整洁。

Cleaning equipment: After using the strip threading machine, promptly clean up any debris such as rubber strip fragments and profile powder on the equipment. Compressed air or a vacuum cleaner can be used for cleaning to ensure that all components of the equipment are clean and tidy.

保养部件：定期对穿条机的传动部件、刀具等进行保养和维护。例如，对齿轮、链条等传动部件添加润滑油，对刀具进行刃磨或更换，以保证设备的正常运行和穿条质量。

Maintenance parts: Regularly maintain and upkeep the transmission components, cutting tools, etc. of the threading machine. For example, adding lubricating oil to transmission components such as gears and chains, and grinding or replacing cutting tools to ensure the normal operation and threading quality of the equipment.

检查电器系统：定期检查穿条机的电器系统，包括电线、插头、插座、控制器等，确保电器连接牢固，无漏电、短路等安全隐患。如发现电器元件有损坏或故障，应及时更换或维修。

Check the electrical system: Regularly inspect the electrical system of the strip threading machine, including wires, plugs, sockets, controllers, etc., to ensure that the electrical connections are firm and there are no safety hazards such as leakage or short circuits. If damage or malfunction is found in electrical components, they should be replaced or repaired in a timely manner.

本文由穿条机友情奉献.更多有关的知识请点击:https://www.jnsaiwo.com我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message