隔热铝型材滚压机自动调刀式三套压力传感器，可通过电子显示器显示的精确调整，并监控型材，以保证准确调整滚压的压力，保证型材滚压的质量。

Three sets of pressure sensors with automatic blade adjustment for insulated aluminum profile rolling press can be displayed on electronic displays for precise adjustment and monitoring of profiles to ensure accurate adjustment of rolling pressure and quality of profile rolling.

工作方式：用3组硬质滚压轮，将穿有隔热条的铝合金型材压合。滚压轮调节：每个滚压轮都能独立的调节（上下、左右），并通过数字显示，第三道滚压轮在滚压过程中，可进行校直，以确保隔热型材的平行度和直线度。此设备为六套动力系统，六组挤刀都带主驱动力，保证型材在挤压过程中受力均衡，进料速度快，工作效率高。此设备适用于铝木、铝塑等各种断桥铝型材

Working method: Use three sets of hard rolling wheels to press the aluminum alloy profile with insulation strips. Rolling wheel adjustment: Each rolling wheel can be independently adjusted (up and down, left and right), and displayed through numbers. The third rolling wheel can be straightened during the rolling process to ensure the parallelism and straightness of the thermal insulation profile. This equipment has six sets of power systems, and all six sets of extrusion knives are equipped with main driving force, ensuring that the profile is subjected to balanced force during the extrusion process, with fast feeding speed and high work efficiency. This device is suitable for various broken bridge aluminum profiles such as aluminum wood, aluminum plastic, etc

铝型材（辊）滚压机/设备优势：此设备为自动调刀式，更换型材时，工作台电动升降自动对准型材挤压部位，托料架高度不必调节，非常省事。上下两片刀可以单独调节高度，对各类异型材包括一些两侧隔热条不在同一个水平面挤压的型材非常实用。

Advantages of aluminum profile (roller) rolling press/equipment: This equipment is an automatic knife adjustment type. When replacing profiles, the electric lifting of the workbench automatically aligns with the extrusion part of the profile, and the height of the support frame does not need to be adjusted, which is very convenient. The height of the upper and lower blades can be adjusted separately, which is very practical for various types of profiles, including profiles with insulation strips on both sides that are not extruded in the same horizontal plane.

隔热断桥铝型材辊压机技术参数：

Technical parameters of thermal insulation bridge breaking aluminum profile roller press:

电 源：380V，50Hz

Power supply: 380V, 50Hz

功 率:3.5Kw

Power: 3.5Kw

驱动方式：六驱

Drive mode: Six wheel drive

滚刀直径：220mm

Roller diameter: 220mm

上下滚刀间距调节范围:0100mm

Adjustment range of upper and lower roller spacing: 0100mm

浮动工作台高度调节范围：0100mm

Floating worktable height adjustment range: 0100mm

型材进给速度：变频调速0-70m/min

Profile feed speed: variable frequency speed regulation 0-70m/min

设备外形尺寸：1600×900×1600

Equipment dimensions: 1600 x 900 x 1600

左右辅助托料架尺寸：5800×420×1000mm(高度可调）

Size of left and right auxiliary support racks: 5800 x 420 x 1000mm (height adjustable)