![歌德瑞斯](/uploadfile/202403/4261af6cde87a34.jpg)
济南歌德瑞斯机械设备有限公司,是窗门制造机器行业的一家集研发、设计、生产、销售、服务为一体的综合性公司。
![歌德瑞斯](/uploadfile/202403/6736bbc1c7ad.jpg)
严格按照行业标准和出口标准组织生产。机器的优良品质和优异性能已被客户广泛认可。同时,公司继续加大对产品研发的投入,以增强产品的核心竞争优势。
![歌德瑞斯](/uploadfile/202403/50cffd99bede5ce.jpg)
严格按照行业标准和出口标准组织生产。机器的优良品质和优异性能已被客户广泛认可。同时,公司继续加大对产品研发的投入,以增强产品的核心竞争优势。
断桥铝型材复合机安装要求
发布时间:2024-05-21 来源:https://www.jnsaiwo.com/
1.装运门窗的运输工具,应有防雨措施。运输门窗应竖立排放,固定牢靠,防止颠震损坏。樘与樘之间应用材料隔开,五金配件也应相互错开,以免相互磨损及压五金件。
1. Transport vehicles for loading doors and windows should have rainproof measures. Transport doors and windows should be arranged vertically and securely fixed to prevent damage from shaking. Materials should be used to separate the frames, and hardware accessories should also be staggered to avoid mutual wear and pressure on the hardware.
2.装外出门窗应轻拿、轻放,不得撬、甩摔。应保证产品不变形、不损坏、表面完好。
2. When installing outdoor doors and windows, they should be handled with care and not pried or thrown. It should be ensured that the product is not deformed, damaged, and the surface is intact.
3.门窗及拼条装饰面应加保护膜,待建筑施工竣工后揭去。
3. Protective film should be added to the decorative surfaces of doors, windows, and splices, and removed after the completion of construction.
4.门窗应放置在通风、干燥、清洁、平整的地方,且应避免晒雨淋,不得与腐蚀性物质接触。门窗不应直接接触地面,底部垫高不应小于5厘米。门窗均应立放,立放角度≥70℃,并应采取防倾倒措施。
4. Doors and windows should be placed in a ventilated, dry, clean, and flat place, and should be kept away from sunlight and rain, and should not come into contact with corrosive substances. Doors and windows should not directly contact the ground, and the bottom height should not be less than 5 centimeters. Doors and windows should be placed upright at an angle of ≥ 70 ℃, and anti tipping measures should be taken.
5.贮存门窗的环境温度应低于50℃。当环境温度为0℃的环境中存放门窗时,安装前应在室温下放置24小时。
5. The ambient temperature for storing doors and windows should be below 50 ℃. When storing doors and windows in an environment with a temperature of 0 ℃, they should be left at room temperature for 24 hours before installation.
以上就是有关:断桥铝型材复合机 的介绍,想了解更多的内容请点击:https://www.jnsaiwo.com 我们将会全心全意为您提供满分服务,欢迎您的来电!
The above is an introduction to the bridge cutting aluminum profile composite machine. For more information, please click: https://www.jnsaiwo.com We will wholeheartedly provide you with full score service. Welcome to call us!
热门产品 / HOT PRODUCT