警告与准备 ：

　　Warning and Preparation:

　　非本机操作手或未经授权的其他操作手禁止开启机器。

　　Non local operators or unauthorized operators are prohibited from turning on the machine.

　　检查过程中发现设备存在安全隐患的禁止启动设备。

　　During the inspection process, if any safety hazards are found in the equipment, it is prohibited to start the device.

　　开机前检查开齿盘是否清洁，机器各部件是否运转自如。

　　Before starting up, check if the gear plate is clean and if all parts of the machine are running smoothly.

　　检查托辊是否与型材底部形状吻合。

　　Check if the roller matches the shape of the bottom of the profile.

　　手送型材进入机器，调整开齿盘至型材齿槽中间，按工艺要求压入适当深度。

　　Hand feed the profile into the machine, adjust the toothed disc to the middle of the profile groove, and press it into the appropriate depth according to the process requirements.

　　调整各导向轮，确保型材运动方向与齿盘接触点运动方向一致。

　　Adjust each guide wheel to ensure that the direction of movement of the profile is consistent with the direction of movement of the contact point of the gear plate.

　　注意电气开关是否指向OFF。

　　Pay attention to whether the electrical switch is pointing to OFF.

　　开机与试运行 ：

　　Startup and trial operation:

　　调整后，可先试一段型材，用隔热条检查是否合适。

　　After adjustment, you can first test a section of the profile and use insulation strips to check if it is suitable.

　　按下启动按钮正式开机工作。

　　Press the start button to officially start working.

　　启动开齿机进行加工，注意观察加工过程中的异常情况，如异常声响、振动等，及时停机检查。

　　Start the gear opening machine for machining, pay attention to any abnormal situations during the machining process, such as abnormal sounds, vibrations, etc., and stop the machine for inspection in a timely manner.

　　操作注意事项 ：

　　Precautions for operation:

　　开齿机应由专人使用和保养。

　　The gear opening machine should be used and maintained by a dedicated person.

　　注意电机和减速机的温升，如温升超过20℃，应停机检查润滑是否良好。

　　Pay attention to the temperature rise of the motor and reducer. If the temperature rise exceeds 20 ℃, stop the machine and check if the lubrication is good.

　　工作时不可戴手套，注意保持机内清洁。

　　Do not wear gloves while working, pay attention to keeping the inside of the machine clean.

　　开机时不可用手接触正在运动的型材，以免受伤。

　　Do not touch the moving profile with your hands during startup to avoid injury.

　　维护保养 ：

　　Maintenance and upkeep:

　　每天清洁机器。

　　Clean the machine every day.

　　每月用30号的油润滑主轴。

　　Lubricate the spindle with oil on the 30th of each month.

　　每六个月用30号的油润滑弹簧螺母。

　　Lubricate the spring nut with oil on the 30th every six months.

　　其他安全事项 ：

　　Other safety precautions:

　　禁止在未经培训或未熟悉开齿机操作的情况下进行操作。

　　It is prohibited to operate the gear opening machine without training or familiarity.

　　禁止在机器运转时触摸或调整刀具和夹具。

　　Do not touch or adjust tools and fixtures while the machine is running.

　　禁止在加工过程中离开工作岗位或进行与工作无关的活动。

　　It is prohibited to leave the workplace or engage in activities unrelated to work during the processing.

　　禁止在酒后或疲劳状态下操作开齿机。

　　Do not operate the gear opening machine under the influence of alcohol or fatigue.

　　注意危险区域标识，避免进入或靠近危险区域，如刀具旋转范围、切屑飞溅区域等。

　　Pay attention to the hazardous area markings and avoid entering or approaching hazardous areas such as tool rotation range, chip splashing area, etc.

　　本文由AB面双头开齿机提供帮助，更多的相关内容请点击：https://www.jnsaiwo.com希望本文能够为您带来帮助，感谢您的阅读！

　　This article is assisted by the AB surface double head gear opening machine. For more related content, please click: https://www.jnsaiwo.com I hope this article can be helpful to you. Thank you for reading!