在隔热断桥铝型材制造中，开齿机用于在铝型材槽口内滚齿穿条，是提高隔热条和铝合金组合型材剪切力的关键设备。下面由有十多年的机器研发经验的济南歌德瑞斯机械设备为您带来开齿机的相关知识。

In the manufacturing of thermal insulation broken bridge aluminum profiles, the gear cutting machine is used to roll and thread teeth in the groove of the aluminum profile, which is a key equipment for improving the shear force of the thermal insulation strip and aluminum alloy composite profile. Below, Jinan Gede Ruisi Mechanical Equipment, with over ten years of experience in machine research and development, will bring you relevant knowledge of gear cutting machines.

　　开齿机的正确操作流程：

The correct operation process of the gear opening machine:

　　开齿机是一种常用于木材、竹材、草料、稻草等物料开齿的机械设备，使用前需认真了解其操作步骤。具体操作步骤如下：

Gear cutting machine is a mechanical equipment commonly used for gear cutting of materials such as wood, bamboo, grass, and rice straw. Before use, it is necessary to carefully understand its operating steps. The specific operation steps are as follows:

　　1.检查开齿机的各部位是否运转正常，无杂质、无变形，电线是否正常。

Firstly, check whether all parts of the gear cutting machine are operating normally, without impurities or deformation, and whether the wires are normal.

　　2.接通电源，按压启动按钮，待转子运转正常后再投料。

2. Connect the power supply, press the start button, and wait for the rotor to run normally before feeding.

　　3.投料前，需要将要处理的物料切成适当长度，使其能够顺利通过开齿机的缝隙，注意不要过长过短。

Before feeding, the material to be processed needs to be cut into appropriate lengths so that it can smoothly pass through the gaps of the toothed machine, and be careful not to be too long or too short.

　　4.投料时，需要保持适当速度，避免过快或加量过大，否则可能会导致设备堵塞。

4. When feeding, it is necessary to maintain an appropriate speed to avoid being too fast or adding too much, otherwise it may cause equipment blockage.

　　5.开齿过程中需要时常检查磨损程度，保持设备良好状态。

During the gear opening process, it is necessary to regularly check the degree of wear and maintain the equipment in good condition.

以上就是有关：AB面双头开齿机 的介绍，想了解更多的内容请点击：https://www.jnsaiwo.com 我们将会全心全意为您提供满分服务，欢迎您的来电！

The above is an introduction to the AB face double head gear opening machine. To learn more, please click: https://www.jnsaiwo.com We will wholeheartedly provide you with full score service. Welcome to call us!