使用穿条机时需要注意以下几点?：

　　When using a threading machine, the following points should be noted:

　　操作前的准备工作：

　　Preparation before operation:

　　确保穿条机放置在平稳、干燥的场所，机器稳固。

　　Ensure that the threading machine is placed in a stable and dry place, and the machine is stable.

　　检查机器是否正常运转，是否有异常声音或震动。

　　Check if the machine is operating normally and if there are any abnormal sounds or vibrations.

　　确认机器的电源是否正常，接地是否良好。

　　Confirm whether the power supply of the machine is normal and whether the grounding is good.

　　检查机器的刀片是否锋利，如有磨损需及时更换。

　　Check if the blades of the machine are sharp, and replace them promptly if they are worn.

　　操作前戴上手套和保护镜，确保安全。

　　Wear gloves and protective goggles before operation to ensure safety.

　　操作过程中的注意事项?：

　　Precautions during operation:

　　避免将手指靠近切割区域，防止意外切伤。

　　Avoid placing fingers near the cutting area to prevent accidental cuts.

　　保持机器清洁干净，定期清洗和润滑，确保机器的正常运转。

　　Keep the machine clean, regularly clean and lubricate to ensure its normal operation.

　　注意皮带和机器的状况，如有异常及时停机检查。

　　Pay attention to the condition of the belt and machine, and stop the machine for inspection in a timely manner if there are any abnormalities.

　　维护与保养：

　　Maintenance and upkeep:

　　每班清洁机器，检查锁紧位置是否变化。

　　Clean the machine every shift and check if the locking position has changed.

　　每月润滑小车位置、轴承位置，检查同步带张紧情况?

　　Lubricate the position of the car and bearings every month, and check the tension of the synchronous belt

　　本文由穿条机友情奉献.更多有关的知识请点击:https://www.jnsaiwo.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from the threading machine For more information, please click: https://www.jnsaiwo.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.